GTG Va, WV, PA, and West. MD is a go!!!!

[HomeDelight Man]

Here's lovemy660 playing with a homey.

<object width="853" height="505"><param name="movie" value="http://www.youtube.com/v/P7wMQlL7MXI&hl=en&fs=1&hd=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/P7wMQlL7MXI&hl=en&fs=1&hd=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="853" height="505"></embed></object>

This is my Dad's 2100. 7.0 cubic inches, 114CC's, with a 28" roller nose bar, and Oregon 52AL .404 square ground chain. Thanks for the video and pictures. Jonathan

 

[HomeDelight Man]

Super 2100 Automatic Hot saw!

Okay, here's a try at embedding:

homedelightman's hot saw. Jonathan give us more info please - as I said my memory is as bad as my hearing and I'm a lousy note taker...

<object width="560" height="340"><param name="movie" value="http://www.youtube.com/v/todNfeXcpHE&hl=en&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/todNfeXcpHE&hl=en&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="560" height="340"></embed></object>

This is my Super 2100 Automatic that Kenn Dunn in Ca had built for me. I have had this saw for about ten years, I don't use it very much. I am suprised it ran at all! Unfortunely, I didn't have time to make up a suitable race chain for the big belly bar, and just using the standard new .404" chain makes the saw look incredibly slow. I will have a race chain for next year! Anyway the saw is 7.0 cubic inches (114cc's), it has a expansion pipe from a 125 Kawasaki dirt bike, the flywheel was shaved down, the timing advanced, and a GEM V-12 reed cage, with 2 Tilliotson HL-360 carbs installed. Thanks for looking! Jonathan

 

[wanab]

wow, just spotted this thread.


looks like you had a great time, turnout. looks like a great spot. great vids and pics. awsome saws!

thanks!

 

[7oaks]

This is my Super 2100 Automatic that Kenn Dunn in Ca had built for me. I have had this saw for about ten years, I don't use it very much. I am suprised it ran at all! Unfortunely, I didn't have time to make up a suitable race chain for the big belly bar, and just using the standard new .404" chain makes the saw look incredibly slow. I will have a race chain for next year! Anyway the saw is 7.0 cubic inches (114cc's), it has a expansion pipe from a 125 Kawasaki dirt bike, the flywheel was shaved down, the timing advanced, and a GEM V-12 reed cage, with 2 Tilliotson HL-360 carbs installed. Thanks for looking! Jonathan

And you forgot to mention that you use that "sweet" smelling Castorl in all your saws....

 

[7oaks]

wow, just spotted this thread.


looks like you had a great time, turnout. looks like a great spot. great vids and pics. awsome saws!

thanks!

And just a few miles north of you on 220...See you next time...LOL

 

[K5krawler]

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/Fk4E7_smFrM&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/Fk4E7_smFrM&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

 

[K5krawler]

Okay one more left after this one.
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/3BzYkLAahbM&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/3BzYkLAahbM&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

 

[K5krawler]

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/3Xc1laKyMwk&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/3Xc1laKyMwk&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

 

[7oaks]

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/Fk4E7_smFrM&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/Fk4E7_smFrM&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

Hey that's my Contra/lightning...Before anybody gives any lip about how it cuts I want to tell you that it is running the original bar and chain. Chain filed down to where there is almost no tooth left and uneven side to side.

Before the GTG I had ordered a new bar and chain and when they arrived the chain didn't fit the bar. Grrrrrrrr! It probably needs tuning as well but I just didn't have time before the GTG.

Here's the contra before the GTG in some 21" oak with the same 21" bar and chain. Fun but not as fun as it will be when I get it tuned properly and with a new bar/chain.

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/r6b_QnOq4fk&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/r6b_QnOq4fk&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

 

[mtfallsmikey]

Me and my RA

object width="425" height="344"> param name="movie" value="http://www.youtube.com/v/OfZFjCjzJhk&hl=en&fs=1&"> /param> param name="allowFullScreen" value="true"> /param> param name="allowscriptaccess" value="always"> /param> embed src="http://www.youtube.com/v/OfZFjCjzJhk&hl=en&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"> /embed> /object>

 

[mtfallsmikey]

An obvious malfuntion here...I went by the instructions!..do you remove all of the "<" ??? from the embed link?

 

[K5krawler]

An obvious malfuntion here...I went by the instructions!..do you remove all of the "<" ??? from the embed link?

What you should have. Is a copy and paste of the embed link. Don't remove anything.

 

[masiman]

An obvious malfuntion here...I went by the instructions!..do you remove all of the "<" ??? from the embed link?

My apologies MFM! I removed the "<" so that you could see what the code looked like in case there was any confusion. Apparently I caused confusion .

Paste the link as is, do not remove any part of the link, unless you know what you are doing .

After replacing the "<":

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/OfZFjCjzJhk&hl=en&fs=1&"></param> <param name="allowFullScreen" value="true"> </param> <param name="allowscriptaccess" value="always"> </param> <embed src="http://www.youtube.com/v/OfZFjCjzJhk&hl=en&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"> </embed> </object>

 

[mtfallsmikey]

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/OfZFjCjzJhk&color1=0xb1b1b1&color2=0xcfcfcf&hl=en&feature=player_embedded&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowScriptAccess" value="always"></param><embed src="http://www.youtube.com/v/OfZFjCjzJhk&color1=0xb1b1b1&color2=0xcfcfcf&hl=en&feature=player_embedded&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" allowScriptAccess="always" width="425" height="344"></embed></object>

Like this...i hope!

 

[mtfallsmikey]

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/oruZpJe-nHk&hl=en&fs=1&rel=0"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/oruZpJe-nHk&hl=en&fs=1&rel=0" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

Buzz Sawyer makin' oodles of noodles.

 

[mtfallsmikey]

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/mHUxXczLDyc&hl=en&fs=1&rel=0"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/mHUxXczLDyc&hl=en&fs=1&rel=0" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

Cousin Carl (7oaks) with the 08 (?)

 

[mtfallsmikey]

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/FP9SoYd8sYM&hl=en&fs=1&rel=0"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/FP9SoYd8sYM&hl=en&fs=1&rel=0" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

EZ now, Buzz!

 

[mtfallsmikey]

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/FmG3ukDbWTk&hl=en&fs=1&rel=0"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/FmG3ukDbWTk&hl=en&fs=1&rel=0" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

HomieD with the amazing Homelite circular saw.

 

[mtfallsmikey]

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/uvhFbDKrpdY&hl=en&fs=1&rel=0"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/uvhFbDKrpdY&hl=en&fs=1&rel=0" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

Ryan's psuedo John Deere pulling tractor/trailer

 

[7oaks]

Hey K5 and FtFalls...Great videos! K5 - What video camera were you using your's are very sharp!