Help!!! 025 question.

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

doc874

Addicted to ArboristSite
Joined
Jun 22, 2005
Messages
1,042
Reaction score
60
Location
Kanuck.
Does anyone know what goes in the hole under the muffler on the clutch side of the 025?? There is a tube, which is part of the case on the left side under the muffler, i believe that it runs to the oiler pump. There is also a smaller hole in the tube which goes through to the clutch side of the case. I have pictures posted in the post 025 IPL which is one page ahead of this one. Because i'm at work i cannot access my pictures so please go to my other post to view. Any help is appreciated.

Doc
 
If I am nt wrong this hole was drilled to make the oil passage way at the factory. It came with a plastic plug in it and I have seen some of them come out. I would just plug the hole with a little amount of silicone or jb weld. Dont put to much to block the passage. Just enough to cover the end of the hole.
 

Latest posts

Back
Top