Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
I’d scrap it, then put on a HDC series carb with the dual low/high mixture screws.You'd be pizzing upwind when trying to flatten out that warpage by hand, without using a blanchard grinder or a mill.I think the HDC-65 was the Super 2 two screw carb that I used to use for the swaps, and there are more two screw types if you dig.
I’d scrap it, then put on a HDC series carb with the dual low/high mixture screws.
You'd be pizzing upwind when trying to flatten out that warpage by hand, without using a blanchard grinder or a mill.
I think the HDC-65 was the Super 2 two screw carb that I used to use for the swaps, and there are more two screw types if you dig.
