How much is a rack of wood ??

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

blkcloud

ArboristSite Operative
Joined
Jan 25, 2012
Messages
452
Reaction score
356
Location
tn
I sold my first load of wood in 1984.. Had a guy come up to me one day and said.. How much is a "rack" of wood?? I guess I looked at him like he had 2 heads.. I was 16 at the time.. He asked me a couple more times .. Honestly , I didn't know what a rack was.. Finally I asked him what was a rack of wood.. He said 4 feet tall 2 feet wide and 8 feet long.. Lol
 
A rick is the same as a "face cord" in many areas. In Georgia it is illegal to sell or advertise wood for sale in any measurement than the cord or portions thereof. (or cubic feet)
Of course, this is widely ignored and I don't know anyone doing time for selling wood by the "stack" or "load" which are two common terms in advertisements. Buyer beware...
 
Nothing wrong with selling wood by stack or load if that's what it's sold as. Like a long log load is what it is. Might be 9 cords, might be 11, all depends on how the logs stack. Or a load of firewood just off the conveyor and not stacked. Pretty well impossible to know accurately how much wood there is... a big pile in a dump bed certainly looks like a ton of wood... that is until it's stacked!

A rick is the same as a "face cord" in many areas. In Georgia it is illegal to sell or advertise wood for sale in any measurement than the cord or portions thereof. (or cubic feet)
Of course, this is widely ignored and I don't know anyone doing time for selling wood by the "stack" or "load" which are two common terms in advertisements. Buyer beware...
 
I sell firewood in many different measurements, the most common form of measurement is in a cord(4'x4'x8' of 16" = 128 cf.) as well as 1/2 cds and the infamous "RICK" (1/3 cord) with no problems with customers/clients or mn. state laws...... how ever though I also sell boiler wood in measurements of truck load, whether it be a ranger load, a 1/2 or 3/4 ton truck load along with a 1 ton truck load? either way how it is sold, there needs to be an agreeable settlement between the buyer and seller for a sales to be just with the terminology of a "RICK" or any other wording to a price per volume.
 

Attachments

  • IMG_6712.JPG
    IMG_6712.JPG
    1.2 MB
  • IMG_6659.JPG
    IMG_6659.JPG
    1.1 MB
  • IMG_6596.JPG
    IMG_6596.JPG
    1.1 MB
Well wood here in Georgia is sold by all sorts of terms and measures. I don't lose sleep over it but it's against state law but the law is apparently not enforced so is essentially meaningless. I only sell it by cubic foot or cords and then have to convert that to "load" for people used to buying wood that way. I sell firewood but don't deliver it. That keeps sales to a minimum but it's too time consuming to deliver and stack wood. At least for me it is.
 
I have never seen anyone advertising or selling firewood by the rick,rack rook, rant or any other term, other than cord. It is against state law here as well and I suspect in most , if not all states, as well. Very few states have the manpower, funds or inclination to police it, until a complaint is filed. Then there is a good chance you will be paid a visit. Consumer fraud is usually taken quite seriously, most of the time. I do think most dealers give honest measures, from what I've seen.
 
I like this definition

Cord vs Face Cord vs Rick
In some areas firewood is measured as a face cord or a rick. A face cord and a rick can mean different things depending on who you talk to but they are generally both the same thing. In most cases this would be any stack of wood that is 8 feet long and 4 feet high or any equivalent that would have a 32 square foot face.

The amount of wood in a rick or face cord will depend on how long the pieces are so these are not the most accurate firewood measurements. The standard length for firewood is often 16″ and a rick or face cord in that case would be 1/3 cord. If the pieces were 24″ long a rick or face cord would be 1/2 cord.

Without knowing the length of the pieces you won’t know how much wood you are getting when you order a rick or face cord. This is why some states like Oregon require firewood measurements to be in cords or fractions of cords when selling firewood.
 
When I lived in VA wood sellers often sold to weekend burners in the DC 'burbs by the rack ~ 16" splits stacked 4 feet high and the width of a stake body bed. Was shy of a face cord but that's where the money was. :)
 

Latest posts

Back
Top