Hunt, NY Competition Stocksaw

ccicora · Jul 3, 2004

Well I thought I would just grin abit about this....

The Ladies competed today in Hunt. The Stocksaw event was Dolmar 6400's 3 cuts in a 10x10 Poplar. And it was Ed Soft or Chris Hard. Gretchen took 1st Place with that 6400 saw. So Dan you were write by saying put a saw in that ladies hands and let her run it. And just a side note 3 of those ladies are competing in the outdoor games. So there was some preaty stiff competition.

G also placed in two other event's J&J cross cut, and Logroll..

The Boy's go tomarrow and it looks like it's going to be a fight just to get in the top 10.

Later,
Chris

ccicora · Jul 4, 2004

Well the boys ran hard today... Lets just say nobody was giving and inch. The stock saw was an experiance I would like to forget. The 361's just did not have enough runtime on them when I got my chance to run... By the time the last 4 ran the saw it was just starting to wake up.
The Hotsaw class was 10x10 Poplar that reminded me of Minden, Wet, Sticky, Hard/ Soft (for you Canadians). 3 cuts cold start and the Rotex's came out of the wood work and 1 Husky 250 on Roids. Jewit won with a 3.81 Schutt was 2nd can't remeber who was third. I was 4th with a 4.?? (Didn't get a chance to write it down). Gretchen won her heat. And Stihltech Pounded on a 166 Sachs Stroker until the third cut when it finnaly came alive. But I will say stihltech beat him to the wood.
I place 3rd in Logroll and 5th in crosscut. My partner had to run off to the hospital since the baby wanted out of his wife now. We just finished the crosscut and he was gone in under 5 min.

Later,
Chris

stihltech · Jul 5, 2004

hunt

HMMMMM, pick on the sponsor.

Next year, 180's with a 170 cutoff saw.

ccicora · Jul 5, 2004

I'm sorry but my 036 pro would smoke that 361. Until that saw gets broken in it just needs help...... like some of the work fuel I have......
Didn't I get them to Say"Pike Hardware" and "Stihl" enough times????
And by the way I need another 029 Super sticker for my club.

By the way... you had a few good complements on your saw and how it ran. You also had a very good cold start for you when you ran. I even had one person ask "Isn't going to run the 26??"

Later,
Chris