Husky 350 tank vent

[Jasonrkba]

IPL showes a plug or/and filter. Is it both or one? I see some huskys have a vent similar to what echo trimmers have hanging out of the tank.

Thanks Jason.

 

[2StrokeFondler]

Should be an air vent, so you get air in the tank when you use the fuel.

 

[Jasonrkba]

Yes. I'm asking if these parts go together or is one a plug

 

[huskihl]

Yes. I'm asking if these parts go together or is one a plug

They go together. But there are a couple different models, need to make certain which style yours is

 

[scottr]

IPL showes a plug or/and filter. Is it both or one? I see some huskys have a vent similar to what echo trimmers have hanging out of the tank.

Thanks Jason.

Jason , that looks like a cintered bronze plug with some kind of filter behind it .
I noticed a asterisk after the two part numbers . In the field of the drawing there will be a note to explain further .
Scott

 

[Chevboy0167]

I have using the inner small white filter then using this style as the outer on all 3 of the 350's I rebuilt.... seem to fend off fuel leakage better...


https://www.partstree.com/parts/husqvarna-537359501/

 

[Jasonrkba]

A regular green rubber duckbill fits in there perfect. I stuffed some foam over it to hold it in and it works perfectly.

 

[Captain Bruce]

Cintered brass plug will plug up. Green duck bill, will stay open under load. You are looking at 1 of 6 IPL's for that model of Husqvarna. Use the serial # of your saw, to get the specific IPL. Good Luck!!