Want to Buy Husky 357xp clutch puller tool OEM or OEM PN?

[aarongd]

Anyone have or know of the PN for an OEM clutch removal tool for a 357xp? i Bought 3 aftermarket and all snapped off first time i used them. Anyone?

 

[Ronie]

Sent you the workshop manual, page 5.

 

[funky sawman]

I use a bar wrench and felling axe on mine. The clutch gets removed every other day on my 357 to grease the sprocket bearing and oiler gear.

 

[cdntbone303]

I believe I used a large socket and cut 3 teeth in it with a grinder to fit into the clutch. Use the same one for the 562 Husqvarna

 

[Lionsfan]

I believe I used a large socket and cut 3 teeth in it with a grinder to fit into the clutch. Use the same one for the 562 Husqvarna

Same here.

 

[TLG]

Same here, You gotta use a deep well for the depth.

 

[rob066]

I use a bar wrench and felling axe on mine. The clutch gets removed every other day on my 357 to grease the sprocket bearing and oiler gear.

I use a small punch and hammer, the punch with the flat end seems to hit more square

 

[Urbicide]

I use a bar wrench and felling axe on mine. The clutch gets removed every other day on my 357 to grease the sprocket bearing and oiler gear.

Isn't your crank drilled on the PTO side, so that you can use a grease gun to give the clutch bearing a friendly squirt through the hole on the end of the crankshaft?