Husky 359 A/V Isolater Spring

[lync]

How do you change those isolater springs. Mine got bent when the saw went under a truck tire. I see the plastic insert but appears that it can only be threaded into the spring not out due to the direction the spring is wound. I assume once I get the insert out I can reach thru the middle of the spring with an allen key and unscrew the bolt that mounts the spring to the gastank rear handle assembly. Any help would be good, or I 'll runn it over a second time with the truck and finish the job.
Corey:chainsawguy:

 

[outdoortype]

look in the Sticky reference links

Under the Sticky reference links at the top of the chainsaw page. Click on that thread. On page 2, Sawtroll has a link to husky workshop manuals. If you select that link browse to the bottom of the page and they have a service manual for the 357xp/359 that looks quite helpful. I would insert the link myself but I don't know how. Plus I'm tired and lazy.

 

[Urbicide]

357XP / 359 Workshop Manual

http://weborder.husqvarna.com/order_static/doc/HWEN/HWEN2000/HWEN2000_1019117-26.pdf