Got a bunch of saws. Shipping not included. PayPal. Shipping from metro Atlanta area Georgia. Saws are POWERHEAD ONLY unless you really want the bar and chain, we can work it out.
Trades for an iPhone 7 Plus, a zero turn, landscaping stuff (looking for anoher FS94R, 4mix weedeater, 4mix edger).
PICTURES ALBUM:
http://imgur.com/a/cViDM
Stihl
$120 - MS210 - Aftermarket clutch cover. Swapped out quick adjuster for flathead adjuster, only one bar stud.
$140 - MS180C - All stock. Looks great, sparingly used.
$280 - MS260 Pro - All stock. Very clean saw. Tore it down to replace intake boot, looks great, cleaned it up. Only kink on it is that the upper shock mount is so-so.
$220 - 028 Super - All OEM. Fine saw.
$180 - 028 WB - Aftermarket Coil. Runs good.
$300 - MS360 - All OEM.
$360 - MS361 - Farmertec oiler to C-clip. Chain brake not working. Otherwise everything else is OEM. Runs great. Few extra parts I'm tossing in with it (drilled muffler, OEM clutch).
Husqvarna
$200 - Husqvarna 55, extra 55 parts - Saw isn't running right. It cranks and starts, but there's either an air leak on fuel line, tank vent is bad, or the clutchside seal is leaking.
$300 - Husqvarna 268 - Clean 268. Runs great. Rear Av springs are gone.
$400 - 372XP - All OEM.
Poulan Super 68 Bow Saw - Got this on a partial trade, cleaned and rebuilt carb, and installed new fuel lines, piston is smooth, runs good. No idea what to ask for it, go nuts.
Trades for an iPhone 7 Plus, a zero turn, landscaping stuff (looking for anoher FS94R, 4mix weedeater, 4mix edger).
PICTURES ALBUM:
http://imgur.com/a/cViDM
Stihl
$120 - MS210 - Aftermarket clutch cover. Swapped out quick adjuster for flathead adjuster, only one bar stud.
$140 - MS180C - All stock. Looks great, sparingly used.
$280 - MS260 Pro - All stock. Very clean saw. Tore it down to replace intake boot, looks great, cleaned it up. Only kink on it is that the upper shock mount is so-so.
$220 - 028 Super - All OEM. Fine saw.
$180 - 028 WB - Aftermarket Coil. Runs good.
$300 - MS360 - All OEM.
$360 - MS361 - Farmertec oiler to C-clip. Chain brake not working. Otherwise everything else is OEM. Runs great. Few extra parts I'm tossing in with it (drilled muffler, OEM clutch).
Husqvarna
$200 - Husqvarna 55, extra 55 parts - Saw isn't running right. It cranks and starts, but there's either an air leak on fuel line, tank vent is bad, or the clutchside seal is leaking.
$300 - Husqvarna 268 - Clean 268. Runs great. Rear Av springs are gone.
$400 - 372XP - All OEM.
Poulan Super 68 Bow Saw - Got this on a partial trade, cleaned and rebuilt carb, and installed new fuel lines, piston is smooth, runs good. No idea what to ask for it, go nuts.