Up for sale is a Husqvarna 181. I got this saw from a buddy who went through it and did a woods port on it while he was in there. He also installed a new oem recoil assy. Since I got it I've installed a green weenie air filter setup, a @Mattyo blue hi-top, and an oem full wrap. I also custom made an outer dog to match the inner one, and I made a new inner dog with a provision for a roller chain catcher. I've run it probably 10-20 times since I got it in late 2020 so, with the most recent time being in early April of this year. It runs, cuts and oils well and the only flaw is that the band adjuster on the (working!) chainbrake handle rubs on the wrap and it'll set the brake every now and again. I was going to buy a plastic-flagged cover for it but I'll let the new owner decide what they want to do. I'd like to get $650 + the ride for it with the 36" bar and a good used 3/8 x 0.063 for the same, or $600 + the ride pho.
edit: I took a close up pic of the dark spot on the underside of the case to show that it's just darker mag and not jbweld
edit: I took a close up pic of the dark spot on the underside of the case to show that it's just darker mag and not jbweld
