Withdrawn Husqvarna 5 series block off kit part#

[How570]

Anyone Know If There Is A Blockoff Kit For Pressure Test For Available For Husky 5 Series Saws And What The Part # Is ,Thanks

 

[singinwoodwackr]

Anyone Know If There Is A Blockoff Kit For Pressure Test For Available For Husky 5 Series Saws And What The Part # Is ,Thanks

Good luck getting one from husqvarna. I tried to get one for a 455 rancher…6-8 mos, maybe. I gave up and made one based on pics of the sst.

 

[How570]

Thanks, I Can’t Even Find A Part # For The Kit Or Any Pics Of One

 

[T_Fishaa]

Looking for the 562xp right?

 

[singinwoodwackr]

View attachment 1106266
Looking for the 562xp right?

Those are really easy to make. I use 14g steel for mine. Cut out with a plasma torch and finish with an angle grinder or Dremel with grinder. Just need the intake to get the pattern.
Then use some flat rubber material.

 

[T_Fishaa]

Those are really easy to make. I use 14g steel for mine. Cut out with a plasma torch and finish with an angle grinder or Dremel with grinder. Just need the intake to get the pattern.
Then use some flat rubber material.
View attachment 1106341

Hey whatever works that’s a pretty good idea actually. Thanks for sharing

 

[singinwoodwackr]

Hey whatever works that’s a pretty good idea actually. Thanks for sharing

I usually make one for any new to me saws, hence, the collection

 

[Bob95065]

I just did a vacuum test 9n a 562xp yesterday. I made a block off plate for the exhaust put of a peice of aluminum plate. I tapped a center hole 1/8 NPT for a hose garb. Ace Harware cells rubber tapered stoppers in the bulk bolt drawers that I used for the intake. I put a golf tee in the impulse hole. Worked great and no leaks.

 

[How570]

Thank You For Sharing That