Husqvarna/Jonsered spur to rim sprocket? - help needed

[MartDalb]

Hey Everyone

Got myself a Jonsered 2250S on the bench, uses a spur sprocket/drum.

I'd like to change this over to a rim sprocket instead, are these interchangeable?
See pictures attached.

Spur sprocket/drum is the original from the 2250S - the rim sprocket/drum is from a Jonsered 2153/Husqvarna 353.



Would these fit eachother?

 

[Backstage]

That Jred is pretty much a red husky 450 unless I’m way off course.

Oregon’s website says it fits the same rim/sprocket system fits the 353, 450, the 2250S, and 2153 among others.

https://www.oregonproducts.com/en/power-mate®-rim-sprocket-system%2c-325%22-7-standard-7/p/108215x

 

[MartDalb]

That Jred is pretty much a red husky 450 unless I’m way off course.

Oregon’s website says it fits the same rim/sprocket system fits the 353, 450, the 2250S, and 2153 among others.

https://www.oregonproducts.com/en/power-mate®-rim-sprocket-system%2c-325%22-7-standard-7/p/108215x

Solid link, thanks!
I did check the worm gear etc. and it matched, just wanted confirmation.
I think I got that now, thanks!

 

[Aknutter]

The Oregon powermate should work.
The splines don't match up on a husq 350 oiler gear exactly, but it does catch

 

[Pioneer]

Link to the Archer sprocket catalog, includes cross reference to Oregon. Lots of good info regarding dimensions.

https://www.google.com/url?q=http:/...YQFnoECF4QAg&usg=AOvVaw020kjrbxmkeZ9Yh0kDgYII