I need help.

[RedeyeKc]

I bought a Powerstorm 20 inch 64.77 cc chainsaw. I cannot find anything about it online. I saw that there was a small post about one several years ago on here but that is about it. I bought a new chain for it that is a full chisel 72 link. But it is too large and long compared to the 76 link chain.
Any sort of help will be great.

 

[Mad Professor]

Looks like a husky? Chi-Com clone saw? Pics helped.

What is pitch of chain? Maybe markings on the bar. Compare both chains side by side. Are links the same length? Measure 10 links on each chain.

 

[RedeyeKc]

Looks like a husky? Chi-Com clone saw? Pics helped.

What is pitch of chain? Maybe markings on the bar. Compare both chains side by side. Are links the same length? Measure 10 links on each chain.

I just did the measuring and the pitch is smaller. It is a .325 76 link chain. Definitely smaller than the 3/8 72 link chain. I cannot find anything more about the chainsaw even using the model and serial numbers. I guess when it comes to parts I may need to follow whatever part number I find to replace it.

 

[Mad Professor]

I just did the measuring and the pitch is smaller. It is a .325 76 link chain. Definitely smaller than the 3/8 72 link chain. I cannot find anything more about the chainsaw even using the model and serial numbers. I guess when it comes to parts I may need to follow whatever part number I find to replace it.

If you have a real chainsaw dealer nearby he should be able to sort things out if you bring the saw in.

HomeDepot, Ace, Menards, etc are not real servicing dealers.......they are getting few and far between.

 

[farmer steve]

Show us pics of the #s on the bar. If you have a .325 chain on it that is the size you need. 3/8 requires a different sprocket.

 

[Captain Bruce]

chinesium chains will fit anything.......even if they don't cut.

 

[RedeyeKc]

Show us pics of the #s on the bar. If you have a .325 chain on it that is the size you need. 3/8 requires a different sprocket.

I did a run of the bar and it is .325 pitch with a 76 link chain I got a chain ordered and on the way.

 

[RedeyeKc]

If you have a real chainsaw dealer nearby he should be able to sort things out if you bring the saw in.

HomeDepot, Ace, Menards, etc are not real servicing dealers.......they are getting few and far between.

I may have to do that just to find out what kind of parts I may need if any. She runs pretty good tho I may need to do a carb adjustment idle seems a bit low where it dies sometimes