terry2tmd
ArboristSite Operative
I need to get some parts or parts saws. What I have are Poulan 4900 runs perfectly, it displaces 77cc very dependable all I did was ad a oregon rim and tune it, and it has become my main back up saw. the top cover is held on by 1/4-20 bolts but that's cosmetic and doesn't effect how it runs and it is a runner. I have a McCulloch 10-10 number 2 automatic, it is a strong runner but it needs a new carb and the gas tank sealed. I also have a homelite XL 102 I had never heard of it either. It is a special edition of a ultra light xl series saw, it displaces 57cc and runs perfectly it looks like someone restored it before I got it. Its only issue Is it leaks gas I think it just needs to be resealed. I also have 1@ decent 2100 cylinder, 2 @ 2100 crank cases complete with cranks(some of the threads will need work),rods, ignitions, and flywheels. I have a 2100 recoil starter cover, fan shroud,and Im pretty sure I could come up with a set of full wrap handle bars for a 2100 if I look hard enough.
What I want to trade for are a couple of parts saws. I have the tank, crank case, ignition, pretty much a solid bottom end I just need covers, air cleaner, carb, intake, recoil starter, handle bar, fan shroud, and clutch side cover.
I also have a Stihl 028 Woods Boss, I have the complete bottom end, and a piston and cylinder, minus the rings(44mm would like to get the 46mm cylinder),recoil starter. I like the 028 but will consider trading these parts too. I want a good 55cc to 60cc fixer upper something like a Husky 55, 455, 357, 359, or 460, or a Stihl 028, 029 to 039 clamshell, 034, 036. I am in kind fo a bind and need to get the 066 up and going, and I badly need a medium class saw, to gather cedar posts with. I am not really brand fussy if you have something let me know please.
What I want to trade for are a couple of parts saws. I have the tank, crank case, ignition, pretty much a solid bottom end I just need covers, air cleaner, carb, intake, recoil starter, handle bar, fan shroud, and clutch side cover.
I also have a Stihl 028 Woods Boss, I have the complete bottom end, and a piston and cylinder, minus the rings(44mm would like to get the 46mm cylinder),recoil starter. I like the 028 but will consider trading these parts too. I want a good 55cc to 60cc fixer upper something like a Husky 55, 455, 357, 359, or 460, or a Stihl 028, 029 to 039 clamshell, 034, 036. I am in kind fo a bind and need to get the 066 up and going, and I badly need a medium class saw, to gather cedar posts with. I am not really brand fussy if you have something let me know please.
