Iowa Fall 2012 GTG

[Hedgerow]

almost forgot... eye candy for Hedgerow!

Eye candy... That one is as nice in orange as mine is in blue!!!

Should go nicely with the 5100S my good friend Specter sent me today...
I'll have to leave the 120 super here at the shop for a replacement for the Black 039 though...
But the 039 is worth bringing... It's the only Stihl I've ever built that I actually like...:msp_scared:

 

[heimannm]

Mitch - Stop by tomorrow if you have a chance, I have 4 or 5 boxes from the same place I found my BP-1 a couple of years ago. Not sure what all I am goin to find.

Mark

 

[chainsawnut460]

Treemonkey and I are still trying to figure out what saws to bring and praobly will be until we pull out the drive way I'm sure well forget something we always do:hmm3grin2orange:

 

[struggle]

I am thinking I will bring a few big ones, a few small ones, maybe a couple of in betweeners, a few gear drives including the BP-1, a few for Bill to take back to SE Iowa, and some assorted vintage parts & stuff for anyone interested to pick through. Oh yeah, the bone stock well broken in 2050 for comparison.

And one smoked pork loin.

Any requests?

Mark

Adjustable carb for the PM55 adjustment on the body of Carb
tank cork gasket (2) for said series of saw.
oiler related gaskets front cover as well (2 sets) for said series saw.
(2) fuel lines as well for said series

Do I need to bring the old carb along? I was going to leave those saws home as they need to much done to them as of now to run until I get said parts since BOB is MIA:bang: I have dead presidents

Oh and I also have a DOLMAR 9010 just saying:msp_wub:

 

[struggle]

Treemonkey and I are still trying to figure out what saws to bring and praobly will be until we pull out the drive way I'm sure well forget something we always do:hmm3grin2orange:

He be taking one of mine home

I do want it back though

 

[chainsawnut460]

Oh what ya sendin back with us?

 

[struggle]

Oh what ya sendin back with us?

its in this picture and doesn't start with an 0

 

[chainsawnut460]

I geuss I'll just find out in a couple days

 

[Hedgerow]

its in this picture and doesn't start with an 0

Why do you taunt me with that 9010???
I don't need another...

 

[specter29]

Why do you taunt me with that 9010???
I don't need another...

forget the 9010 I'd be drooling over the Mac

 

[struggle]

I geuss I'll just find out in a couple days

I thought by saying it doesn't start with an 0 it would be easy to pick out. MS460

 

[struggle]

Why do you taunt me with that 9010???
I don't need another...

You actually try to justify your saws:msp_ohmy:

forget the 9010 I'd be drooling over the Mac

I darn near broke my hand tonight trying to start it. There's a reason it has a compression release on it that I sometimes forget to reset after it fires on choke.

 

[chainsawnut460]

I figured that's what it was scott told me we were bringin a 460 home that's good though it can keep mine company on the way home

 

[nstueve]

Treemonkey and I are still trying to figure out what saws to bring and praobly will be until we pull out the drive way I'm sure well forget something we always do:hmm3grin2orange:

gas, bar oil and saws!?!?!?!?


Hey,
I know I can find them myself but would anyone happen to have a 42mm 024 or a 44mm 026 piston? New, OEM, AM... whatever... I can order them from northwoods but I thought if someone happened to have a spare Meteor or something I'd jump on it. got several 024/026 carcasses waiting on a new slug...

 

[ancy]

Got them ready for the prom now they just need dates.

Sent from my XT881 using Tapatalk 2

 

[Steve NW WI]

Whaaaaattt!!!???
Load up the wood truck!!!

It's a concept, but $250 for gas for the trip would be a kick in the wallet I don't need. If I don't make it down, it'll get loaded multiple times, I'm still taking tomorrow off work, might as well cut wood.

That's a one hour repair on a hoist 1 1/2 on a floor jack. No worries get it done and stop hitting curbs with it like a demo car:taped:

I'm leaving it to my buddy with the shop and the tools, along with the experience. He's gotta work till noon at his real job, if it's up and running it will be a later trip than I planned on.

Time for a nap, 48 hours of work since 3pm Monday has me holding the eyelids open with toothpicks.

 

[Work Saw Collector]

Any requests?

Mark

Yep request any one of the 125cc big boys and the P100 in McCulloch colors if you have that saw I forget the number, maybe 1000?

 

[Homelite410]

I heard an internal "squeak" in my 350 last night, so she is all in pieces for a new bearing and reassembly when i get home, then a warm ride by the heater to speed up the hondabond cure!! I have an 044 p&c in good shape 12mm flavor if anyone wants it ill bring it!

 

[Work Saw Collector]

I'll hang a cig out muh mouth for a photo op with Stephen :hmm3grin2orange:

Repped, now guess the color of it. That would be a pic that would be splattered all over AS.

 

[Homelite410]

It's a concept, but $250 for gas for the trip would be a kick in the wallet I don't need. If I don't make it down, it'll get loaded multiple times, I'm still taking tomorrow off work, might as well cut wood.



I'm leaving it to my buddy with the shop and the tools, along with the experience. He's gotta work till noon at his real job, if it's up and running it will be a later trip than I planned on.

Time for a nap, 48 hours of work since 3pm Monday has me holding the eyelids open with toothpicks.

So take Grizzlyadams car ?