Sold jonsered 2252

[cory@owen]

Jonsered 2252 basically like new. Very clean low hour saw. Not more than 10 tanks ran through it. $375 PHO shipped. Will include a 16" oregon pro light bar and lpx chain in good condition for $25 extra. Also offering 16"(68 driver) tsumura light n tuff bar and lpx chain for $100 extra. Tsumura bar is new with a new chain. Only ran for a couple cuts to try it out. Would prefer to sell PHO. Thanks
.

 

[sunfish]

Dang, another great deal on a great saw! Bad timing for me, or I'd own it!

 

[Matt81]

Do i need another 50cc saw??? Hell yeah!

If you are happy to post the saw to me at my expense you can consider this sold! I would like to buy it for my uncle who desperately needs something lighter than his 038 mag with a 28" bar. He is not one to complain but he has mentioned to me more than once that it is just getting too heavy for him to swing around anymore. He is 65 but would still leave me for dead! Honestly he is the fittest old fart i have ever known! He needs a good saw as he has a large property. He has helped me out over the years so much i would like to do him a good turn back.

 

[fin460]

The new styling on these Jreds really suck me in. I'm hoping to pick up a cs2260 when I can sell some saws, and afford it. I'm inching closer to bank ruptcy everyday!

 

[Matt81]

The new styling on these Jreds really suck me in. I'm hoping to pick up a cs2260 when I can sell some saws, and afford it. I'm inching closer to bank ruptcy everyday!

I have just sold another saw today for what i was asking, so i am another step closer to hopefully getting a 2260 soonish. I just have way too many 50cc class saws, i need something in the 50cc-70cc size.

 

[daryng]

this is a fantastic deal on a solid Jonny. I am the proud owner of a 2252 as well as a well ported 2260. The 2252 really opens up with a muffler mod. I'm running mine with 3/8" 16" and it is really smooth and strong. A perfect lightweight limbing/firewood saw. I wish this had been for sale a couple months ago before I paid way more for mine.

 

[cory@owen]

Sale pending....

 

[DexterDay]

Congrats... Someone got a great deal!

 

[cory@owen]

this is a fantastic deal on a solid Jonny. I am the proud owner of a 2252 as well as a well ported 2260. The 2252 really opens up with a muffler mod. I'm running mine with 3/8" 16" and it is really smooth and strong. A perfect lightweight limbing/firewood saw. I wish this had been for sale a couple months ago before I paid way more for mine.

They are fine saws. I'd keep it but I've been after a clean 346xp to have ported, I got hooked after running one ported by the monkey. I found one today and don't need two 50cc saws. Happy to pass on a great saw for a great price.

 

[fin460]

what are the differences between the cs2252 and cs2253

 

[DexterDay]

what are the differences between the cs2252 and cs2253

Same as 545 and 550xp. Just a slightly de-tuned model and lacks crank stuffers.

 

[rattler362]

Darn nice looking saw.

 

[Matt81]

I'm happy to be giving it a new home down under!

In honesty i will probably keep it and give my uncle one of my 5105's that has hardly been run. It was broke in and used for a while and then shelved because i got another at a great price. The 5105 would better suit the type of cutting he will be doing anyway with its increased torque and power over the 2252.

It's been over 12 years since i had my 630 so it's about time i had another Jonsered. Have to get your priorities in order eventually!

 

[CR888]

Well done matt nice score. Saws like this never last long, it shall make a fine little saw for your uncle....you'd better be taking the light n tough bar.

 

[Matt81]

Well done matt nice score. Saws like this never last long, it shall make a fine little saw for your uncle....you'd better be taking the light n tough bar.

Sorry to disappoint but im getting the prolite bar and matching chain...
Each to their own. I know the tsumura are great bars but I have never really seen the point myself. I don't buy junky bars and have no problem with any of the bars i own and run so why spend top dollar for something slightly better.
What i have does the job just fine. Same reason why i don't drive a Lamborghini LM002 4x4 utility to work.

 

[cory@owen]

The pro light is a nice bar for this saw. Bars last better on small saws any way. I really wanted to keep the tsumura for the 346 anyway.

 

[sunfish]

Sorry to disappoint but im getting the prolite bar and matching chain...
Each to their own. I know they are great bars but I have never really seen the point myself. I don't buy junky bars and have no problem with any of the bars i own and run so why spend top dollar for something slightly better.
What i have does the job just fine. Same reason why i don't drive a Lamborghini LM002 ute to work.

I get very good service out of the Pro-Lite bars! I also like the laminated Husky/Jred bars made in Norway as they are a notch above the ProLites and lighter yet.

 

[Matt81]

I'm more than happy with the pro lite. I have several and a very happy with them. Works out well for both of us as you get to keep the bar you wanted anyway.