jonsered 52 where is the chain oiler turn down screw its puking oil

[sledhead34]

 

[sundance]

This should help.

 

[Cantdog]

View attachment 976364
This should help.View attachment 976364

Yep but it's not the hex head that you see....you reach through the hex opening with a flat blade screwdriver to adjust the oil output.

 

[sundance]

Yep but it's not the hex head that you see....you reach through the hex opening with a flat blade screwdriver to adjust the oil output.

Book learning (me) vs. actual knowledge (Cantdog).

 

[super rube]

Anyone know if the Husqvarna 135 mark 2 has an oil adjustment screw. I can’t find it. Thanks

 

[Chevboy0167]

To super rube, the 135 MII is non adjustable.....

https://www.partstree.com/models/135-mark-ii-husqvarna-chainsaw/clutch-oil-pump-2/

 

[sledhead34]

THANKS ,i was trying to research everywhere should do a you tube on this ,its needed there is nothing out there i could find

 

[sledhead34]

Yep but it's not the hex head that you see....you reach through the hex opening with a flat blade screwdriver to adjust the oil output.

the limit the oil which direction do you turn the screw clock wise

 

[dave ensign]

Turning the adjuster screw clockwise reduces the oil flow. To start, turn the screw all the way in (DO NOT OVER TIGHTEN) then back it out 1 1/2 to 2 turns to start.

 

[sledhead34]

Turning the adjuster screw clockwise reduces the oil flow. To start, turn the screw all the way in (DO NOT OVER TIGHTEN) then back it out 1 1/2 to 2 turns to start.

right just curious it wasnt to far away from the right setting but it was sucking oil like crazy just need to test the settings and see if i can reduce the use

 

[sledhead34]

right just curious it wasn't to far away from the right setting but it was sucking oil like crazy just need to test the settings and see if I can reduce the use