jonsered 630

rickyrooster · Jun 6, 2006

A FEW MONTHS BACK I WAS GIVEN A JONSERED 630 SUPER WITH A SCORED CYLINDER AND PISTON. AFTER REPAIRING IT AND PUTTING IT TO GOOD USE,(I CUT FIREWOOD FOR MY WOOD FURNACE) I FELL IN LOVE WITH IT AND IT IS NOW MY FAVORITE SAW FOR ALL AROUND USE. WHILE SURFING EBAY A FEW WEEKS AGO I FOUND A REGULAR 630 PARTS SAW AND BOUGHT IT. AFTER RECEIVING IT AND CHECKING THE SAW OUT I FOUND THAT THE ROD HAS UP AND DOWN MOVEMENT IN IT AND I FEEL THE CRANKSHAFT NEEDS REPLACING. MY QUESTION IS ARE THE CRANKSHAFTS FROM A HUSQVARNA 61,266,268,272, AND THE JONSERED 625,630 AND 670 ALL THE SAME. WILL THEY BOLT RIGHT IN MY JONSERED CASES. ALSO ARE THE CLUTCHES AND FLYWHEELS INTERCHANGEABLE. I HAVE SEEN RED SAWS WITH ORANGE CRANK CASES AND VICE VERSA BUT DO NOT LIKE THE WAY THEY LOOK. EVEN THOUGH I PLAN ON MATING A 272 JUG AND PISTON ON IT I WOULD LIKE IT TO LOOK LIKE AN ORIGINAL 630 AS IT STARTED OUT AS. THANKS RICK :chainsaw:

havvey · Jun 6, 2006

630

yes and no some parts are different (clutch) be very carefull as there are diferences in the piston/blocks make sure they match (example 266 xp jug and piston not 266jug with xp piston) i happen to have a lot of those parts now 1 truckload to be exact!! :bowdown:

:yoyo:

retoocs555 · Jun 6, 2006

If it's your favorite saw, get new parts to do the job.

If you want to go used I probably have a whole 630 crankcase with a good bottom end still in it if you wanted to save some time and money.

SawTroll · Jun 7, 2006

It may be time to study some IPLs.

Husky IPLs is readily availiable trough some of their websites, at least the UK, US and Norwegian ones. Use the Product & Manual Search link on the main page.

I have not been able to find a similar back-log of Jred IPLs, but some relevant ones are here.

rickyrooster · Jun 8, 2006

retoocs555 said:
If it's your favorite saw, get new parts to do the job.

If you want to go used I probably have a whole 630 crankcase with a good bottom end still in it if you wanted to save some time and money.

Hey Scott, How much do you want for a 630 crankcase with a good bottom end. thanks Rick!