Want to Sell Jonsered 90

[GPRJon]

Hello, I’ve been following the site for a while but just became a member recently. I have a few vintage saws that I will be selling starting with this Jonsered 90. The saw starts and runs and is mostly complete. I know I’m missing the spark plug boot and perhaps something else minor like that. Included is a 20” b/c with what I believe to be the original bar by Windsor (sprocket nose). The saw runs great and OMG, she’s a beast! I have a few pics I will post now. I haven’t tried to clean up the the saw. She is very dirty and will clean up significantly. If you need more pics just let me know. Questions welcome!

price $600

 

[Martin13131]

That is not a jonsereds 90

 

[wcorey]

That is not a jonsereds 90

Some of it is...

 

[GPRJon]

That is not a jonsereds 90

Ok, will someone help me identify it. I will take down the post if it’s not what I thought. Thanks for your help!

 

[Martin13131]

Ok, will someone help me identify it. I will take down the post if it’s not what I thought. Thanks for your help!

Its more of a 621 to me.

 

[GPRJon]

Can you put a Jonsereds 90 side cover on a 621 and what can I provide, like a serial number or photo of motor, that will clear the identity discrepancy?

 

[Martin13131]

Can you put a Jonsereds 90 side cover on a 621 and what can I provide, like a serial number or photo of motor, that will clear the identity discrepancy?

My 90

 

[sawfun]

Looks like a Jonny 80 to me.

 

[wcorey]

Definitely a mutt between 80 and 90.
90 recoil, 80 top cover. Would have a decomp if it's a 54mm cylinder, see if it has the decomp port or not.
Cylinder base number for 80/81/801 is 52zn9, 90 is 54zn71...

 

[sawfun]

90 has a decomp, 80 does not. Both are 87cc's.

 

[Martin13131]

90 has a decomp, 80 does not. Both are 87cc's.

The 80 is not 87cc.

 

[GPRJon]

Here is a pic with the top cover off. BTW, here are my other saws that are for sale. I’d like to sell the whole lot at once. Taking offers. Please PM me. Thanks!

 

[sawfun]

The 80 is not 87cc.

Sorry, you are correct.

 

[wcorey]

The problem with positive ID is that much of the 80/90 stuff is interchangeable.
You can effectively turn one into the other and vise versa.
This one has components from both but looks to be more 80 than 90.
Cylinder (and entire top end) looks to be 80/81/801.

Your asking price is on the high side and would be more in line for one with very good cosmetics, mechanical soundness and being mostly consistent with one particular model.
Good advertising practice here (when trying for top dollar anyway) would be to also include pics of the bottom as well as a clear shot of the piston through the exhaust port with the muffler removed.
A compression reading helps too.
A short vid of it running/cutting is always a plus.
And a good track record of prior sales and forum participation unfortunately...

 

[GPRJon]

Thank you all for the help with identification. I think what we do have here is a combination of an 80 and 90 Jonsereds. I have learned so much in just a couple days from the members and the site in general. Everyone has been willing, helpful, and polite which is great. I will leave this thread open so that others may learn from it as I did. I do have a few more questions about the Jonsereds saw before I repost it. I read something about “west coast” exhaust. Does my saw have this and does that change it’s value? What else should I look for that may affect value? I have a lot of 4 saws that I’m going to list. As ”wcorey”stated, I will be taking video and better pics. Thanks again!

 

[Martin13131]

Thank you all for the help with identification. I think what we do have here is a combination of an 80 and 90 Jonsereds. I have learned so much in just a couple days from the members and the site in general. Everyone has been willing, helpful, and polite which is great. I will leave this thread open so that others may learn from it as I did. I do have a few more questions about the Jonsereds saw before I repost it. I read something about “west coast” exhaust. Does my saw have this and does that change it’s value? What else should I look for that may affect value? I have a lot of 4 saws that I’m going to list. As ”wcorey”stated, I will be taking video and better pics. Thanks again!

Measure the piston on it to make it definite conclusion but you dont have a jonsereds 90 since it doesn’t have a decompression on the cylinder.

 

[wcorey]

The small square exit exhaust is the more typical one, the other type that I know of has a step in the top/front with louvers going across.

 

[Alec123]

Is jonsered 80 cuz that what i looks like not a 90 is it for sale

 

[goincb89]

Hello, I’ve been following the site for a while but just became a member recently. I have a few vintage saws that I will be selling starting with this Jonsered 90. The saw starts and runs and is mostly complete. I know I’m missing the spark plug boot and perhaps something else minor like that. Included is a 20” b/c with what I believe to be the original bar by Windsor (sprocket nose). The saw runs great and OMG, she’s a beast! I have a few pics I will post now. I haven’t tried to clean up the the saw. She is very dirty and will clean up significantly. If you need more pics just let me know. Questions welcome!

price $600

Still selling? I’m Interested PM me a number