Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
The Stihl 63 picco version of 3/8lp has larger diameter bushings and more massive tie straps I would use that, Oregon stuff says 42cc tops if I recall correctly.What is wrong with just skip in the larger 3/8. I would expect chip kind of clogging up in the low space under the cutting top plate.Longer than 20 inches/ 72 drive links in 3/8 hard nose bars seem to be 0,063" and large nose radius and large mount so if you do it post back how you rigged up the bar and sprocket. As mentioned above milling guys do it somehow.
The Stihl 63 picco version of 3/8lp has larger diameter bushings and more massive tie straps I would use that, Oregon stuff says 42cc tops if I recall correctly.
What is wrong with just skip in the larger 3/8. I would expect chip kind of clogging up in the low space under the cutting top plate.
Longer than 20 inches/ 72 drive links in 3/8 hard nose bars seem to be 0,063" and large nose radius and large mount so if you do it post back how you rigged up the bar and sprocket. As mentioned above milling guys do it somehow.
