McCulloch Chain Saws

[Mac 6-10]

The CP-70 is ALIVE! (Still on its extremely rich break in tune)

 

[Mac 6-10]

Just in case you forgot I bought this as a carcus for 20 bucks and rebuilt it.

 

[ethar]

Your almost there good 4 stroking so carb is doin it's job just gotta tune.

 

[Mac 6-10]

I need some parts for my 3-10E project. Am in need of an oil tank for a 3-10e or a 10-10e. They are unique as they have two cast in bosses that hold the stator on the saw. I also need the early sloped fuel tank top in black and a correct 3-10e airfilter cover with the sticker. I already have a cover that will work but would like the correct one. Let me know if you guys have anything. Thanks, Steve.

 

[ethar]

All the e stuff I've seen guys want a fortune for. Like you said they have one off parts.

 

[ozflea]

Ah ebay where some make a fortune and don't talk about Stihl bits they support the national economy

 

[ozflea]

Ah ebay where some make a fortune and don't talk about Stihl bits they support the national economy

 

[MS460WOODCHUCK]

I am awaiting a PM700 and a 7-10. The pm700 does not have a muffler. Do the two saws have the same muffler or do they interchange? Also will a 10-10 muffler bolt on these saws? I have owned one of each of the 700 and 7-10 in the past but it has been a while and I can't recall the mufflers being the same or not.

 

[ethar]

I know they both used a duct style muffler and best I can recall it uses the same opening as the 10-10. Don't remem the exact bolt pattern but alot of these parts would work even though they weren't listed to. And there where several mufflers for these models. Mine has the pancake style but I had a duct style from a parts 10-10.

 

[ethar]

I know they both used a duct style muffler and best I can recall it uses the same opening as the 10-10. Don't remem the exact bolt pattern but alot of these parts would work even though they weren't listed to. And there where several mufflers for these models. Mine has the pancake style but I had a duct style from a parts 10-10.

 

[joeymt33]

I am awaiting a PM700 and a 7-10. The pm700 does not have a muffler. Do the two saws have the same muffler or do they interchange? Also will a 10-10 muffler bolt on these saws? I have owned one of each of the 700 and 7-10 in the past but it has been a while and I can't recall the mufflers being the same or not.

You could use a muffler from another 10-series with the duct separate from the body. The flat muffler/duct combo style will not work due to interference with the cooling fins. I probably have several if you're interested in one.

Joey

 

[MS460WOODCHUCK]

So a regular flat/pancake style 10-10 muffler will work?

 

[joeymt33]

I need some parts for my 3-10E project. Am in need of an oil tank for a 3-10e or a 10-10e. They are unique as they have two cast in bosses that hold the stator on the saw. I also need the early sloped fuel tank top in black and a correct 3-10e airfilter cover with the sticker. I already have a cover that will work but would like the correct one. Let me know if you guys have anything. Thanks, Steve.

I'll check the parts I have and see if I have the low fuel tank top. Anything else you need? I don't have the filter cover or crank case.

Here is a 3-10E I sold a while back

 

[Mac 6-10]

No only the duct style will work on the 70cc saws

 

[MS460WOODCHUCK]

So basically any muffler that runs up the side of the cylinder will work. I'm a little lost trying to understand you please bear with me lol.

 

[ethar]

You need the duct style for the 70cc like this http://store.chainsawr.com/products/mcculloch-7-10-muffler-assembly

 

[ethar]

Least that's one of the easier parts to find try finding an air filter for the early 10 series.

 

[MS460WOODCHUCK]

I hear ya on the airfilter. Too bad I just sold my parts 3-10 with the filter. So the 7-10 and PM700 filter is interchangeable?

 

[joeymt33]

I hear ya on the airfilter. Too bad I just sold my parts 3-10 with the filter. So the 7-10 and PM700 filter is interchangeable?

The filters are interchangeable

 

[MS460WOODCHUCK]

The filters are interchangeable

I was meaning mufflers lol. My bad.