Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Had a recommendation from someone in another thread to post these pictures here. My dad picked up a PM650 at a yard sale for $20-it was clean as a whistle and the gas tank was dry as a fart. I ran it for a while with the 18" bar it came with but I needed something that would handle some bigger wood. I gave Lee at Lil' Red Barn a call and got a bunch of parts including a 24" bar with full chisel full skip chain and a tune up kit. I'm running it on 50:1 (my other saws are both Stihls) 100LL fuel which it seems to like so far. I also have a PM610/Eager Beaver that runs which I might put the old 18" bar on just for some variety. What is the operative difference between these saws since they are apparently both 60cc? Is it just the carb and/or the tuning? All shined up and 24" bar and skip chain fitted:Some of this week's bucking and splitting. Finally got around to working on some of the locust and cherry that fell during the "Four'Easters" in 2018-this is only about half of it. The trunks are about 20-22" in diameter so the 24" bar really helps. Looking forward to browsing this thread more and hopefully learning the difference between a 610 and a 650 as well as what parts interchange:
Had a recommendation from someone in another thread to post these pictures here. My dad picked up a PM650 at a yard sale for $20-it was clean as a whistle and the gas tank was dry as a fart. I ran it for a while with the 18" bar it came with but I needed something that would handle some bigger wood. I gave Lee at Lil' Red Barn a call and got a bunch of parts including a 24" bar with full chisel full skip chain and a tune up kit. I'm running it on 50:1 (my other saws are both Stihls) 100LL fuel which it seems to like so far. I also have a PM610/Eager Beaver that runs which I might put the old 18" bar on just for some variety. What is the operative difference between these saws since they are apparently both 60cc? Is it just the carb and/or the tuning? All shined up and 24" bar and skip chain fitted:
Some of this week's bucking and splitting. Finally got around to working on some of the locust and cherry that fell during the "Four'Easters" in 2018-this is only about half of it. The trunks are about 20-22" in diameter so the 24" bar really helps. Looking forward to browsing this thread more and hopefully learning the difference between a 610 and a 650 as well as what parts interchange:
