DirtyDan
ArboristSite Lurker
Hello! I posted about this saw a while back and have been slow working on it. I am hoping this will be the last hurdle (for now).
I took the saw apart, cleaned the carburetor, put in new gaskets, new fuel lines, bar and chain oil line, cleaned the air filter, filter on the fuel line, and oil line filter, and fixed things that the previous owner "fixed."
I am now here. It starts (thankfully) but refuses to idle. I am unfamiliar with the high, low, and idle screws. When I had the saw apart, I tighted them down all the way, then backed them out one turn each to serve as a "baseline." Are these screws and their adjustments the remedy for this issue given the repairs I have done?
Thank you all for your time and expertise!
(I am unable to attach the video...so here is a link to the video!)
https://www.reddit.com/r/Chainsaw/s/fmb3AX36vg
I took the saw apart, cleaned the carburetor, put in new gaskets, new fuel lines, bar and chain oil line, cleaned the air filter, filter on the fuel line, and oil line filter, and fixed things that the previous owner "fixed."
I am now here. It starts (thankfully) but refuses to idle. I am unfamiliar with the high, low, and idle screws. When I had the saw apart, I tighted them down all the way, then backed them out one turn each to serve as a "baseline." Are these screws and their adjustments the remedy for this issue given the repairs I have done?
Thank you all for your time and expertise!
(I am unable to attach the video...so here is a link to the video!)
https://www.reddit.com/r/Chainsaw/s/fmb3AX36vg
