juttree
ArboristSite Guru
I have a 441 that the spark plug threads are stripped. I was into this saw already so I have pictures of the inside of the cylinder and pictures of the piston, both are unmolested and ready for thread repair. I was going to do this myself but I just have too many projects going and decided to pass it on. The only issue that I know of (besides the threads) is a small crack at the back of the handle. It doesn't cause any problems but it's worth noting. This saw comes with a parts saw that has a really nice tank and handle if you want to switch it out. The parts saw only has a few small parts missing but the p/c are shot (in my opinion).
As a little side note, I forgot to plug the impulse line back on to the nipple of the crankcase and also forgot to put the little round spacer sleeve's in the intake. The little spacers will come with both saws, but I just didn't want to pull everything apart again. $500 plus shipping for both saws
As a little side note, I forgot to plug the impulse line back on to the nipple of the crankcase and also forgot to put the little round spacer sleeve's in the intake. The little spacers will come with both saws, but I just didn't want to pull everything apart again. $500 plus shipping for both saws
