ms192 chain brake

[kennertree]

I have a ms192 and the chain brake seems to be gummed up. If I take the cover off, and take out the two screws to get to the inerds of the chain brake is any springs gonna fly out and be a pain to put back in? I need to clean it inside to free up the handle, it doesnt move back and forth very good and I just need to free it up. I've never taken one apart before so i just want to know what I'm getting into.

 

[Brushwacker]

I wouldn't think any springs would fly apart.I would take the cover off and blow it out with air and look it over good. If you need to use something to cut through tree sap , wd40 or a number of other things should work. Might even soap it down and as a final rinse use a stream of moderate water pressure.