ms250c-be rebuild question

[jonj]

I purchased a used sthil ms250-c-be ( it has the easy2start feature) about 8 months ago. It worked fine until last week when the oiler went out. I torn down the saw and found that the molded chase where the oiler tube ran had been destroyed, repaired, and the repair failed. I bought an aftermarket ms250 body- it is easy to find the aftermarket ms250 body, not so easy for the ms250c case-only to find that it is different that bodies are slightly different. The ms250 c ignition coil is different that the 250c ( and so is the flywheel) and it would also need a slgiht body modification so the easy2start starter housing will fit. So here is the question- Can I use the MS250 coil on the MS250c flywheel, and /or does anyone else have any suggestions. thanks alot for any help.