MS390 RIM.

[L34]

Hi all at AS.
Can anyone confirm if 11250071041 rim kit will fit a 390?
Want to replace my spur.
I think it will also fit later 036/MS360/MS310.
Getting conflicting info here down under but believe I have the right P#.
The IPLs I have looked at only show the spur P#.
Cheers Chris.

 

[Bob Hedgecutter]

I get 1125 160 2900 for the drum alone and 1125 007 1002 for the kit.
But can check through service manuals tomorrow maybe to confirm.

Try looking for a set for 034/036, should be the same fit.

 

[Mad Professor]

Hi all at AS.
Can anyone confirm if 11250071041 rim kit will fit a 390?
Want to replace my spur.
I think it will also fit later 036/MS360/MS310.
Getting conflicting info here down under but believe I have the right P#.
The IPLs I have looked at only show the spur P#.
Cheers Chris.

I believe it should. My 029/039 IPL lists the small early 036 clutch parts with the small bearings.

The 034/036 upgrade with the 16mm bearing is the 3/8 7T with part number you gave. You want to go 3/8"?

If you want 0.325" it's a different # and you get a 9T rim.

The old style/small bearing you can run a 8T 0.325" rim.

See PDF

I get 1125 160 2900 for the drum alone and 1125 007 1002 for the kit.
But can check through service manuals tomorrow maybe to confirm.

Try looking for a set for 034/036, should be the same fit.

Bob, that should fit. But it's the early style 3/8 7T with the small 13mm bearing

PDF has update info

Picture has the old and new 3/8" setups

 

[Bob Hedgecutter]

I believe it should. My 029/039 IPL lists the small early 036 clutch parts with the small bearings.

The 034/036 upgrade with the 16mm bearing is the 3/8 7T with part number you gave. You want to go 3/8"?

If you want 0.325" it's a different # and you get a 9T rim.

The old style/small bearing you can run a 8T 0.325" rim.

See PDF



Bob, that should fit. But it's the early style 3/8 7T with the small 13mm bearing

PDF has update info

Picture has the old and new 3/8" setups

View attachment 998737

Excellent reply.
Happy to be corrected/amended to- my info was just from notes of an 036 I had and would have to go through a box of Stihl service bulletins to confirm- but your info is more precise.

 

[Mad Professor]

Excellent reply.
Happy to be corrected/amended to- my info was just from notes of an 036 I had and would have to go through a box of Stihl service bulletins to confirm- but your info is more precise.

Thanks. I'm not sure about the carriers/springs/shoes? They switched those around a bit too.

 

[L34]

Thanks guys.
Yes 3/8.
I thought diff P# due to small bearing.
Cheers Chris.