MS461 large felling dawgs

[MichMich]

Hi Folks.
Am finishing my second MS461, and wanted it in same configuration than my fully OEM MS461, with the large felling pikes (ref are 1122-664-0506, 1122-650-7701 and 1128-664-0502). But it seems that 1122-664-0506 is no longer listed by Stihl. Has anyone heard of this? Any advice?
Cheers

 

[Stihl99]

Solid Spikes are
Inner: 1122 664 0508
Outer: 1122 664 0503

 

[huskihl]

Solid Spikes are
Inner: 1122 664 0508
Outer: 1122 664 0503

For every other 1128-1122 saw, yes. But not for a 460/461. One of those numbers needs to be an 1128 number or the spikes won’t line up

 

[Stihl99]

For every other 1128-1122 saw, yes. But not for a 460/461. One of those numbers needs to be an 1128 number or the spikes won’t line up

The numbers pulled today for the 462 are.
Inner: 1122 664 0506
Outer: 1122 664 0501

OP stated he could not get 1122 664 0501
So the next set of Stihl OEM large spikes are:
Inner: 1122 664 0508
Outer: 1122 664 0503
Now with that said the inner spike with the nut spot welded on the top bolt hole is: 1144 660 0801

The Skeleton spikes I use today on my saws are:
Inner: 1144 660 0802
Outer: 1144 664 0504

 

[huskihl]

The numbers pulled today for the 462 are.
Inner: 1122 664 0506
Outer: 1122 664 0501

OP stated he could not get 1122 664 0501
So the next set of Stihl OEM large spikes are:
Inner: 1122 664 0508
Outer: 1122 664 0503
Now with that said the inner spike with the nut spot welded on the top bolt hole is: 1144 660 0801

The Skeleton spikes I use today on my saws are:
Inner: 1144 660 0802
Outer: 1144 664 0504

The OP has a 461 though, not a 462. For the 462, you are correct

 

[MichMich]

Finally received a reply from Stihl France. They're no more available here cause they're not intenses for European market, but for MS461R saws. And it's the 1122 664 0506 that we can't find anymore here.

But, after having googled for a while, I finally found it in Germany. Ironically, Stihl told me about the outer dawgs 1128 664 0502 could only go on the large cover, which is wrong. I have one on my other 461, and it's bolted on a MS362 cover (was previously on a standard 461 cover). Advantage of the 362 cover? Captive nuts (461 bar studs have been replaced by 261 ones, the low profile studs)

 

[Stihl99]

The OP has a 461 though, not a 462. For the 462, you are correct

Yes but the same spikes fit 661, 500, 462, 461, 441, 440 look at his pic, he doesn't have the rescue plate, the rescue saw calls out 1128 664 0502 clutch cover spike.

 

[huskihl]

046, 460, and 461 use a different outer spike than the others. If you use a pair of matched 1122 dogs, the inside will stick out about 3/8” beyond the outer

 

[Stihl99]

046, 460, and 461 use a different outer spike than the others. If you use a pair of matched 1122 dogs, the inside will stick out about 3/8” beyond the outer

Thank you sir