Treeman2021
ArboristSite Lurker
After Months maybe years of fighting my STIHL cm211 hard stasrting i feel i have solved the problem.
First i already know you have to get fuel to the carb. without the 211 having a primer bulb you pull the starting cord to prime your saw also using full choke, problem is to much fuel and the saw is flooded.
What i now do is with full choke i pull the starting cord around five times take choke off full and put it in run, then wait around five to ten minuets, and again try starting saw and it fires right up.
This has worked with a cold saw and again when saw is warm.
First i already know you have to get fuel to the carb. without the 211 having a primer bulb you pull the starting cord to prime your saw also using full choke, problem is to much fuel and the saw is flooded.
What i now do is with full choke i pull the starting cord around five times take choke off full and put it in run, then wait around five to ten minuets, and again try starting saw and it fires right up.
This has worked with a cold saw and again when saw is warm.
