need saw chain

[rivahrat]

looking for some .404 chain for a husky 2100 32 inch bar

 

[Lawn Masters]

Try Baileys, they have these sorts of things in stock.

 

[rivahrat]

can anybody on here make me a deal with some .404 saw chain? it would be greatly appreciated. it will be for a 32 inch bar will get back with a drive link coun later tonight

 

[formersawrep]

What gauge is the bar? I have some .404 chain. Let me know.

 

[rivahrat]

bar is .58

 

[formersawrep]

I believe what I have is .050, but I will check. Unfortunately, it will probably be next week before I can confirm.

 

[rivahrat]

chain

am in no hurry as it would be at least next week before i could make payment arrangements. but i still appreciate the help.

 

[P_woozel]

why .404? get .063 3/8 it works just fine on those larger powerheads. At least run .063 for .404 I didnt know they had .058 for the larger pitch.

 

[rivahrat]

smaller chain

well i would prefer not to change bar. as i cant afford to do so at this point in time.
now if you can work some miracle and make it fit the same bar i would be happy to oblige.



also my chain has 98 drivers

 

[P_woozel]

See, I tried to tell you thhis saw is just a headache lets just take it off your hands and be done with it.

 

[rivahrat]

???

what it worth to you?

 

[Al Smith]

News flash.I think I bought the last of the .404 by .058 full chisel that Baileys had in stock.I could be wrong! Jeff S.,had some .404 semi.

 

[Stumper]

Well, if Al scarfed up the last of the .058 .404 change the rim and the bar tip and run 3/8ths.

 

[Al Smith]

I think I have some .404 by .058 chipper,but it's already looped[old Homelite],it would have to be knocked apart and re rivited for length .Give Grand Dog a shout,Baileys may have a little of it left.At the time,they had about 300 links,and I got 143 ,for a giant old bar for my Homey 2100.Go right to Baileys part of the forum and ask,he will get back with you.

 

[Bill G]

I didnt know they had .058 for the larger pitch.

They did. Oregon 9AC is 1/2" pitch chipper chain, .058 gauge. I have a good supply.

Bill

 

[rivahrat]

decisions decisions

well its like this i cant afford to buy a "new" bar and some chain. so if someone can make me a deal on a bar of at least 32" 36 is preferred. then i can change the chain, and well depending on how much the sprocket will run me is also a good thing to think about.

the bar i have is a Windsor 32"

 

[rivahrat]

hmm???

OK was just out working on the oiler and when i took off the rim sprockes it says 3/8 on it. however when i compare the chain i have on that saw to the ones on my others (all running 3/8 chain) the spacing between the rivets is greater by approx 1/8 inch. for this reason i thought it was .404. the chain is sandvik chain and only other numbers are on the drivers. stamped .058.

never came across anything like this before. Any help / ideas?

 

[scottr]

#15

rr , reread post #15.

 

[rivahrat]

decided to go with 3/8 .058 chain anybody got any???

 

[Al Smith]

3/8" by .058

Now that size you can buy by the mile,if you choose to.Baileys has it in stock,at around 22 cents per link,plus a buck or two to make it up.