New Husky top-handled saw?

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

pavement99

ArboristSite.com Sponsor
Joined
Nov 17, 2006
Messages
117
Reaction score
8
Location
Indianapolis
I read a rumor recently that Husqvarna might be testing a new top-handled chainsaw. This saw is supposedly in the class of the 200T, but lower in price.

(I'm not referring to the 338, 334 or T435... supposedly this a whole new design).

I don't have any other details... curious if anyone has heard anything? I've always thought the top-handle was the big hole in Husky's lineup.
 
Last edited:
That would be great, because my 338 in stock form is a chump next to the 200T. Put a big half inch hole in the muffler and tune her and she does better.
 
Good luck with that....even in the same "class," husky is an overall back row student right down to the last bolt.

If husky had what it took to compete will the 200t, they would have done it a long time ago. They gave their answer already....that left most of us searching for another.

Even if they give their best effort and come up with something similar, it will stihl be half the saw it should be.

I think where husky really lacks is with their pole saws. Even echo has them beat there.

Sincerely, Stihl giddy about my 200t. :givebeer:
 
I heard the same thing being talked about between a local dealer and a husky rep..........Did'nt catch the whole conversation, but will ask the local husky dealer next time I'm there....
 
I think where husky really lacks is with their pole saws. Even echo has them beat there.

Sincerely, Stihl giddy about my 200t. :givebeer:

I've had a Husky pole saw for 4 years now, and use it quite a bit, don't know how much you have used them. B:greenchainsaw:ut mine performs flawlessly everytime I have used it, strong enough engine and with a well kept sharp chain cuts great! I've used a friends Echo......and it's flimsy and doesn't have as much power as my pole saw.
 
I've had a Husky pole saw for 4 years now, and use it quite a bit, don't know how much you have used them. B:greenchainsaw:ut mine performs flawlessly everytime I have used it, strong enough engine and with a well kept sharp chain cuts great! I've used a friends Echo......and it's flimsy and doesn't have as much power as my pole saw.

The husky polesaw is weedwhipper with a chainsaw on the end of it. It has no reach, what's the point?

I've gone through two of them with the company. The motor fires up fine, but the rest falls apart, typical for husky, it also has next to no real power in comparison, not typical for husky. Can't speak to the power of an echo, but at least they've endeavored to reach out and actually be able to be used in a tree. Husky may have echo beat overall, but it you can't reach it, it is all in vain.

I have the Stihl HT131t, it has both reach and power. I'm running up to a 16" bar and chain with no complaints. On a side note, the bars and chains interchange with the Stihl tophandles, as well as their other small saws. Try that with the husky.

The reach and power of the Stihl allows me to effortlessly make the quality cut needed when pruning large laterals. Very important to me and especially useful on the row when I'm all but able to make a proper final cut on a large lateral when the power lines cast a "shadow" on my reach with the boom truck.

Furthermore, all that reach and power comes in real handy during storm recovery.

If you get the chance, get one. I guarantee you'll see what I mean and be well satisfied. That husky stick will start collecting dust. If they weren't so overpriced, they'd make great trainers.
 
Chevy:Ford It all depends on what you grew up with.

I would get a 346xpt in a friggin heartbeat! :smoking:

I used to think it was that simple, and to some extent it can be, but I've had both for a couple of years now. Husky is definately an overall distant 2nd imho.

Why would you want such a heavier tophandle? Maybe it would fit you better since you are a bigger guy?
 
The husky polesaw is weedwhipper with a chainsaw on the end of it. It has no reach, what's the point?

I've gone through two of them with the company. The motor fires up fine, but the rest falls apart, typical for husky, it also has next to no real power in comparison, not typical for husky. Can't speak to the power of an echo, but at least they've endeavored to reach out and actually be able to be used in a tree. Husky may have echo beat overall, but it you can't reach it, it is all in vain.

I have the Stihl HT131t, it has both reach and power. I'm running up to a 16" bar and chain with no complaints. On a side note, the bars and chains interchange with the Stihl tophandles, as well as their other small saws. Try that with the husky.

The reach and power of the Stihl allows me to effortlessly make the quality cut needed when pruning large laterals. Very important to me and especially useful on the row when I'm all but able to make a proper final cut on a large lateral when the power lines cast a "shadow" on my reach with the boom truck.

Furthermore, all that reach and power comes in real handy during storm recovery.

If you get the chance, get one. I guarantee you'll see what I mean and be well satisfied. That husky stick will start collecting dust. If they weren't so overpriced, they'd make great trainers.

Okay, whatever works for you, mine has 12' of reach and has performed well for me. If it ain't broke......well you know the rest. Sorry they didn't work for you. I'm happy with mine and has made me lot's of $$$$$ That's all that counts at the end of the day!
 
Okay, whatever works for you, mine has 12' of reach and has performed well for me. If it ain't broke......well you know the rest. Sorry they didn't work for you. I'm happy with mine and has made me lot's of $$$$$ That's all that counts at the end of the day!

At least it is making you money. That does matter, but for me, it is not all that counts.

The little 12 footer, with the little 12 incher, always left me wanting for more on larger/higher cuts. The shaft at the base broke on the first one. It couldn't handle what little power it did have.

I'm 5'10", maybe your 6'4", so I found the answer with the Stihl. When you need a new one, try the Stihl for a few dollars more, you won't be sorry. Once you've run one, you just about can't stand to bother with the husky. I often wondered why husky had not even really attempted a response to it. Perhaps, again, as with their top handles, they figured that they had.

I bought my Stihl to handle a large commercial account. I addressed a couple hundred neighborhood trees, mostly ash, a job the husky could never have accomplished for lack of reach and power.

That saw almost singlehandedly afforded my chipper upgrade in addition to paying for itself.

I noticed you have a 200t. Again, I think you'll be better off in the long run with the additional convenience of compatible bars and chains.
 
I used to think it was that simple, and to some extent it can be, but I've had both for a couple of years now. Husky is definately an overall distant 2nd imho.

Why would you want such a heavier tophandle? Maybe it would fit you better since you are a bigger guy?

I'll agree with the top-handle, but the 346 is the best all-around saw for pwr:wgt.
 

Latest posts

Back
Top