Four Paws
Addicted to ArboristSite
I am selling an Olympyk 264F Deluxe chainsaw. This saw is 60cc, Italian made and is built better than just about anything you can buy these days.
Fully adjustable carburetor. Free flowing muffler. It oils substantially. The chain brake works as it should. AV mounts are nice and tight. The air filter is in great shape. New drive sprocket. Both inner and outer spikes. I went through the entire saw at one time, and it has limited time on it since.
This will make someone an excellent firewood saw. Or, a great first saw to modify. Olympyk's port out very nicely and have a ton of room for gains. Not the newest technology on the market, but these are SOLID saws. Closed port Gillardoni cylinders arranged strikingly similar to Stihl saws. Lots of compression on this one - 165psi at 5000 ft. - that should be about 190 psi at sea level.
I sparked it up recently and ran it a bit. It is cleaned, checked out and ready to cut. All parts are still available for this saw.
It is set up with a nearly new 16" Oregon Pro-Lite bar and semi-chisel chain which is included.
$325 buys it.
I prefer cash - selling some saws to fund the purchase of new digital SLR camera as a gift for my family. Will consider trades/partial trades limited to 70cc+ builders - 372/385/395XP saws, 6400-7900 Dolmar, 046/460, 064, 066/660 Stihl, and older muscle saws of 6cube or larger displacement.
Fully adjustable carburetor. Free flowing muffler. It oils substantially. The chain brake works as it should. AV mounts are nice and tight. The air filter is in great shape. New drive sprocket. Both inner and outer spikes. I went through the entire saw at one time, and it has limited time on it since.
This will make someone an excellent firewood saw. Or, a great first saw to modify. Olympyk's port out very nicely and have a ton of room for gains. Not the newest technology on the market, but these are SOLID saws. Closed port Gillardoni cylinders arranged strikingly similar to Stihl saws. Lots of compression on this one - 165psi at 5000 ft. - that should be about 190 psi at sea level.
I sparked it up recently and ran it a bit. It is cleaned, checked out and ready to cut. All parts are still available for this saw.
It is set up with a nearly new 16" Oregon Pro-Lite bar and semi-chisel chain which is included.
$325 buys it.
I prefer cash - selling some saws to fund the purchase of new digital SLR camera as a gift for my family. Will consider trades/partial trades limited to 70cc+ builders - 372/385/395XP saws, 6400-7900 Dolmar, 046/460, 064, 066/660 Stihl, and older muscle saws of 6cube or larger displacement.
If there ever was a saw that needed a compression release button it is these. I have a orange one that is super strong. I need a coil for mine now (the money for one) it is cracked up and when it gets hot it craps out. If you get the parts saw maybe we can work out a trade for the coil?
