Oregon Reference Chart.

[gr8mac]

Is there a website that I can go to that has a reference chart for oregon bars? I want to be able to put in the numbers on the vintage bar I have and find out what saws it fits. Thanks.

 

[gatkeper1]

Post the bar numbers
Maybe someone can ID them

 

[Crofter]

http://www.brownandwiser.com/oregon_bars.html

 

[gatkeper1]

Unfortunately that site is only good for the current Oregon numbering system
The example of 208RNDD009 using the old numbers was 23363
the same bar but in 0.050 guage was 23203

To add further confusion they also had a second numbering system that could be used to id the same bar
The 23203 bar could also have 01975 as the ID number

 

[gr8mac]

The bar I have is a vintage Oregon roller tip, new, never been on a saw. The numbers off the bar are as follows: 33359, this is the first number closest to the stud guide. The second number is 2163-1965.

I also have the original flat box it came in. It says wright saw 628579 and also 1965M5.

If in fact the bar was for a wright there still has to be other saws it will fit. It has four different holes for adjusters in it. If anyone can identify it I would greatly appreciate it. Thanks in advance.

 

[gatkeper1]

Could be for one of two Wright saws the C70 7.06cid or the
C50 4.7cid
They were available in 17-21-25-30-36-40 inch lengths
Std chain was .404 0.63
I will try to find more info,I know I have a Wright catalog somewhere. My oldest Oregon cat. is 1975 and Wrights were already gone by then.