P42 saw

[Dan boy]

Howdy Folks
I have a P42 that was working fine. A while back it started to stall. When restarted it would only idle. I cleaned the metal screen inside the carb and replaced the in tank fuel line and filter. It worked for a short while and now it only starts when fully choked and will not run when the choke is off. So I put a carb kit [k10] in and it still does the same thing.
Any suggestions? Cheers, Dan.

 

[rarefish383]

Dan, go to the main menu and scroll down till you see "chainsaws". That's where you want to be. A lot of Pioneer guys there to help you out, Joe.