Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
It was quite for a while because i was doing all the things that were told.So this is the result:Cleaning the point with sandpaper and then cleaning it with a dry paper.Re gapping the point 0.015" so i used 0.4mm.Cleaning the flywheel with compressed air.re gapping the flywheel 0.012" so i used 0.3mm.Result, i got no spark at all. (before i did this a had some weak Sparks).I've already double checked the gaps and it all looks good.So now i really don't know what to do. I think that mayby the sparkplug cable is the one who is making all the trouble. But i can't remove the cable from the high tension coil. Is this just a screw connection??
It was quite for a while because i was doing all the things that were told.
So this is the result:
Cleaning the point with sandpaper and then cleaning it with a dry paper.
Re gapping the point 0.015" so i used 0.4mm.
Cleaning the flywheel with compressed air.
re gapping the flywheel 0.012" so i used 0.3mm.
Result, i got no spark at all. (before i did this a had some weak Sparks).
I've already double checked the gaps and it all looks good.
So now i really don't know what to do. I think that mayby the sparkplug cable is the one who is making all the trouble. But i can't remove the cable from the high tension coil. Is this just a screw connection??
