pioneer p26 51 cc

[tony marks]

anybody know this saw... no h adjustment.,, at least where u normally find it ... ive adjusted it better, with the l an idle screw....
underneath [doesnt appear to be the oil ] theirs an lge screw that appears to be an adjustment.
this is another pioneer w the easy arc compression ,so im thinking this is mabe an h combined with adjusting this feature. any help appreciated. saw runs good but the motor fades some in cut.
ive been able to adjust this out somewhat but i know its not rite yet.and i believe,, if this is the h adjustment,, i ll have to readjust the whole thing.
thanks for any help. tm

 

[gatkeper1]

The H speed mixture is controled by a fixed orifice jet on the P26

 

[tony marks]

yep u rite . the screw in the bottom just opened up the compression. dont know as i can figure the purpose of that, as with it closed ,it still has the no compression start. anyway it leaked gas out of the fuel system somewhere, when i stood it on end.[not the carb] so guess ill get into it later. its got potential but it aint there yet. thanks gatekeeper for the info.

 

[tony marks]

pioneer p26 took some tlc ,,but i finally got it cutting strong. this seems to be an edition preceding the partner 500.
its not as fast as the partner . i think it will benefit from an micro bar and 95 vp chain.its good when a plan comes togather.
now they tell me my olympyk 962. is waiting on a lever of some sort and it ll be like a new saw.if thats the case it should cut with the 036. i should be so lucky. but im gonna expect it,, as it really handles well.oh well thought id finish off a couple of past post. later now.