Piston stop for Stihl 011 or other

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

dwaugh

Addicted to ArboristSite
AS Supporting Member
Joined
Aug 13, 2024
Messages
1,961
Reaction score
1,823
Location
NE Ohio
Before joining this forum I bought a piston stop on Amazon so I didn't ask here. This is from China and all metal, it occurs to me that a metal stop might not be best. I have plenty of rope of different sizes and can buy something different if that would be advised. Any thoughts, should I avoid using this? The paint chipping is poor quality paint and bouncing around here....


IMG_0605.jpeg
 
Quite a while ago I recall a guy who punched a hole in the top of a Stihl piston. think it was a 19x model like the budget top handle. It turned out the saw originally came with a piston stop that was supposed to be used at the edge of the piston not in the center. Stihl hides their parts sheets, so it is hard for me to know if that model has a specific piston stop. They don't hide the owners manuals but that is not current. If you have a tool to grab the clutch and an impact driver of sufficient size to drive it the inertia of the flywheel is all that is needed. Obviously must go in the correct direction first try. If the tool has the same size hex as the spark plug the scrench can be struck with a stick or similar while supported on the other end and the same result achieved. At least for an Echo 361p.
 

Latest posts

Back
Top