This saw has 180 on compression due to the squish being at .020 and having a .030 pop up piston. The carb has the limiters removed and the hole drilled in the top cover to help eliminate the bog. Saw still has a little variation in the idle rpm even with the carb mods. I used a stihl clamp on the intake boot but I will include the new Husqvarna metal clamp with the saw. Muffler was modded and it only has about 1/2 tank of fuel thru it. I'm selling it due to having 3 of these saws right now.
The overall condition is pretty good but it does have the mismatch orange due to fading. Bottom of the saw and the plastics do have some blemishes.
Please look at the pictures and ask me any question you may have.
ASKING 400.00 SHIPPED TO YOUR DOOR IN THE LOWER 48
The overall condition is pretty good but it does have the mismatch orange due to fading. Bottom of the saw and the plastics do have some blemishes.
Please look at the pictures and ask me any question you may have.
ASKING 400.00 SHIPPED TO YOUR DOOR IN THE LOWER 48
