Sold Ported Husqvarna 353. All OEM and strong!

[daryng]

I have a 353 that I just finished up that I'm trying to move in order to tackle other projects. I bought this saw as a complete saw, just needing some TLC. I installed a new meteor piston and proceeded to port it ending up with these final numbers:
Exhaust: 102
Transfers: 120
intake 78
Blowdown 18
squish .022

This saw has been coverted to run 3/8" chain and comes with a newer 16" replacement nose bar with a newer loop of oregon LGX.

I'm in the process of loading a video and pics now.

I'd like to get $300 shipped out of it.

 

[fin460]

I'd like to run this saw


Sent from my iPhone using Tapatalk

 

[daryng]

I still need to do a little cleaning on it. The saw came from Maine so it has some tree sap on it, but I'll clean it up before I ship it. I also have a newer clutch cover that is in better shape and has a new decal.

 

[daryng]

here is a video of it running. The wood is hard maple. Most videos you see people running in cottonwood or pine. This is one of the harder woods in the midwest because the grain isn't parallel. You'll be bucking up logs and then noodles will start shooting out. It was just what I had laying on the ground. It's all about keeping the RPM in the cut, and I think this does just fine. It's still on its first tank since the rebuild, and its on par with my ported 346xp.

 

[daryng]

I'd like to run this saw


Sent from my iPhone using Tapatalk

I'm sure that can be arranged. I'm at a family event in st. Joe now, but should be home this afternoon, and all day tomorrow. I still want to run some more tanks through this before it sells. Its still on its first tank. Its a fun little saw. I want to try it with an 18" 3/8" to compare it to the 346. If I were guess, I'd say compression is in the 190 range.

 

[sammy riddle]

Will have a spot somewhere real close to my 4 346xp thanks