Power Mac 330 (600043U) questions

[KennyW in CT]

Saw hasn't been run in years, diaphragms are real stiff. I'll replace those and get her running. Carb is a C1 ZAMA. One of the crimp eylets on the kill wire was snapped off so now that's fixed. How sloppy should the sprocket be on the crank? IE, how much wobble should it have? This one can be tilted 1/8 inch in both directions. Seems real sloppy to me. Also, can I use fuel line for the impulse hose? The original clear fuel line is real hard, is it a standard size? Last question: how does the auto sharpener work? It seems like if it is rubbing on the outside of the chain, it could not resurface the inner cutting edges? Thanks, Kenny.

 

[ozflea]

Saw hasn't been run in years, diaphragms are real stiff. I'll replace those and get her running. Carb is a C1 ZAMA. One of the crimp eylets on the kill wire was snapped off so now that's fixed. How sloppy should the sprocket be on the crank? IE, how much wobble should it have? This one can be tilted 1/8 inch in both directions. Seems real sloppy to me.

Well their cheap enough to replace if your in doubt

Also, can I use fuel line for the impulse hose? The original clear fuel line is real hard, is it a standard size?

Yes

Last question: how does the auto sharpener work? It seems like if it is rubbing on the outside of the chain, it could not resurface the inner cutting edges? Thanks, Kenny.

This chain is sharpened only on top you don't need to sharpen inside the cutter.

Mc Bob.

 

[KennyW in CT]

What size is the fuel line on this? It looks like 1/4 OD and 3/32 ID.

I've been to 4 different places and no one has this size.

1/4 will seal on the Tank hole but the ZAMA C1 nipple is real small, like .115.

Thanks, Kenny