jmye1524
ArboristSite Lurker
Looking for any info on this saw......picked one up, can't find anything
Pro Mac 440 vc
- Thread starter jmye1524
- Start date
Help Support Arborist Forum:
jmye1524
ArboristSite Lurker
So far the only thing I can come up with is the year...87-89....Anyone?
jmye1524
ArboristSite Lurker
Yah, I saw that....wish it had more info about it. The saw fires up good but I haven't cut with it yet.
.
.
ARsawMechanic
Yawn
I have one of these too. Probably one of the ugliest Mcculloch (or any brand) chainsaw I have ever seen, mine runs pretty well. I ordered a few parts for it yesterday from Fayetteville Equipment in NY, so its not quite made of "Unobtanium", yet. You can get IPL's from Parts Tree .com, (listed under pro mac 430) I have had no luck finding size or much else about it either.
Probably your best bet is to post in the "Official" Mcculloch thread, there are guys in there that get down to the serious nitty gritty with them. Those fellows really specialize in the more classic iron stuff, but maybe one of them could share some insight on these.
http://www.arboristsite.com/showthread.php?t=71126
or try
http://www.arboristsite.com/groups/all-things-mcculloch.htm --this one is a moderated group.
Links may or may not work, lots of changes going on round here, seems when they change something, link stops working.
Probably your best bet is to post in the "Official" Mcculloch thread, there are guys in there that get down to the serious nitty gritty with them. Those fellows really specialize in the more classic iron stuff, but maybe one of them could share some insight on these.
http://www.arboristsite.com/showthread.php?t=71126
or try
http://www.arboristsite.com/groups/all-things-mcculloch.htm --this one is a moderated group.
Links may or may not work, lots of changes going on round here, seems when they change something, link stops working.
Last edited:
ARsawMechanic
Yawn
Here ya go, if your still around & interested to see it, courtesy of Fayetteville Equipment, Fayetteville NY.
"They started production in 1/1985.The 440 was 2.4 CI or 44cc.Not a bad saw.We didn't sell many.They were more money.I have it's smaller brother a PM430VC.It still runs.Thanks for your order."
"They started production in 1/1985.The 440 was 2.4 CI or 44cc.Not a bad saw.We didn't sell many.They were more money.I have it's smaller brother a PM430VC.It still runs.Thanks for your order."
