Want to Buy PRO MAC 700 CYLINDER

[carpy929rr]

I'm in need of a good cylinder and piston for a Pro Mac 700. Recently bought one that was blown up. Literally! Would like to try and make it run again.

 

[svk]

I have a 2" bore NOS P+C for 10 series. Is the PM700 the same PN?

 

[brandonstc6]

I have a 2" bore NOS P+C for 10 series. Is the PM700 the same PN?

http://www.outdoorking.com/pages/McCulloch/Petrol_Chainsaws/93714_Pro_mac_700.pdf
Here is the link to the ipl. Do you have a part number for your cylinder? It should be the same as the pm700 has a 2.00" bore and the stroke is the same.


Sent from my iPhone using Tapatalk

 

[brandonstc6]

I'm just trying to help the op see if that's what he needs


Sent from my iPhone using Tapatalk

 

[svk]

My cylinder is a NOS replacement and therefore has no numbers. My understanding is if the ignition bolt holes are the same (points and electronic are different and I'm not sure which one this is for) it should work on any ten series. Wasn't sure if the Pro Macs were different though.

 

[carpy929rr]

Ok. It is a 2" bore. I have pics. from all sides. It is electronic ignition. I think the 7-10a was the previous model with points.
This is a pic of the ignition mount.

 

[carpy929rr]

http://www.outdoorking.com/pages/McCulloch/Petrol_Chainsaws/93714_Pro_mac_700.pdf
Here is the link to the ipl. Do you have a part number for your cylinder? It should be the same as the pm700 has a 2.00" bore and the stroke is the same.


Sent from my iPhone using Tapatalk

There is no part number for the cylinder. Thank you for posting that though.

 

[svk]

Sent you a PM with the pic of my cylinder.

 

[450doug]

Did you find your parts?

I have a Pro Mac 700 that's a runner, just an option....

PM if interested. Can send pics.

 

[carpy929rr]

Did you find your parts?

I have a Pro Mac 700 that's a runner, just an option....

PM if interested. Can send pics.

I did actually. Thank you though.