Sold rebuilt 575xp

[814hammer]

I have a 575xp that needed a new piston and cylinder i had got a used cylinder off a guy her on as the cylinder was oem and not all scored up the piston is after market can't recall the brand i got it from a guy here also new aftermarket piston rings had tore saw all apart 100% cleaned saw has been vac and pressure tested all is fine the bearings were inspected and also fine the saw has a missing clip that holds top down a cracked in top plastic and a little cracked in clutch cover other then that saw is flawless asking 350 shipped obo pho or what do you have that willing to trade

 

[814hammer]

I would like to trade for stihl usg grinder or good quality grinder project saws pm me what you got worse I can say is no

 

[Johny.W]

you have psi on that 575xp

 

[814hammer]

I'll get pics up of compression after I find my gasge

 

[814hammer]

Sold sale pending tomorrow

 

[Johny.W]

ok if the sale don't work out I my have a offer for you....

 

[814hammer]

You will be number 3 then