Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Agree - CSMing is hard slow work compared to other forms of milling.However I wouldn't let that put you off, especially if you tailer the size of saw depends to the size of log, and look carefully at optimising your whole setup. Even a 50cc can cut small logs OK.My 70cc 441 with a 25" bar running Lopro low raker chain in <20" wide wood is just as much fun as the 880 with the 3/8" chain in 36" wood. Some of this is due to the reduced weight of the 441.
Agree - CSMing is hard slow work compared to other forms of milling.
However I wouldn't let that put you off, especially if you tailer the size of saw depends to the size of log, and look carefully at optimising your whole setup. Even a 50cc can cut small logs OK.
My 70cc 441 with a 25" bar running Lopro low raker chain in <20" wide wood is just as much fun as the 880 with the 3/8" chain in 36" wood. Some of this is due to the reduced weight of the 441.
