I have a nice Sachs Dolmar KMS-4 rotary for sale. The saw starts, runs, idles, revs, cuts and oils. That said, it could probably stand to be tuned. I don’t know much about these and have heard they’re a little finicky, so I made no attempt to adjust the tune. The collector I got it from is a friend whom I trust and he said he had done a bit of cutting with it at a get-together, but all I did was make a couple of quick cuts. I just put fresh fuel in it for a little testing and to make a video. In order to be safe I used 32:1. To be clear, I'm not selling this as a wood cutter, but rather as a collectible.
The little fragile guard near the bottom of the handlebar is broken like you often see with these. There is also a chunk out of the front/bottom of the clutch cover. Both of these can be seen in the photos. The safety interlock on the rear handle is MIA. Lastly, the kill switch does not kill the saw; I just use the choke. I’m not saying all of this to make the saw sound bad, just trying to be up front about what I know about it. It really is a nice saw, and a good example of a KMS-4.
A video of the saw running can be found here:
https://youtu.be/fuiTVj8-wqg
Asking $1,500 plus shipping & insurance. Buyer pays any transaction fees. PayPal is preferred, but I’m okay with most any reasonable payment method.
If you're interested in purchasing the saw please private message me. Thank you.
The little fragile guard near the bottom of the handlebar is broken like you often see with these. There is also a chunk out of the front/bottom of the clutch cover. Both of these can be seen in the photos. The safety interlock on the rear handle is MIA. Lastly, the kill switch does not kill the saw; I just use the choke. I’m not saying all of this to make the saw sound bad, just trying to be up front about what I know about it. It really is a nice saw, and a good example of a KMS-4.
A video of the saw running can be found here:
https://youtu.be/fuiTVj8-wqg
Asking $1,500 plus shipping & insurance. Buyer pays any transaction fees. PayPal is preferred, but I’m okay with most any reasonable payment method.
If you're interested in purchasing the saw please private message me. Thank you.
