Smallest gas saw?

[Scooterbum]

Just wondering who made the smallest gas saw?
Over the weekend I repaired a homey XL-2 top handle with about a 10" bar.My wife had a fit about it and was using it for about half the day instead of her MS170.Gotta admit though it was a gutsy little saw for all the bigger it was.

 

[Cut4fun]

I have a Poulan 1800 30cc top handle. Are we asking cc wise for the small size? I also just worked on a 1st run super 2 that was pretty small, dont remember cc's.

 

[Bob Wright]

The smallest Echo is 27.9 cc in the CS-280, i have a few 30cc Echo's that run great with a 12" bar...Bob

 

[gatkeper1]

The Cox might be the smallest made at 22.9cc
http://www.acresinternet.com/cscc.n...b0a62d717a273b7288256b87000318a6?OpenDocument

 

[RaisedByWolves]

Yeah, but the bars on the wrong side.........




Orline Mustang is pretty small cc wise.




The Skill 1612, Johnsered, national auto is pretty small over all though.

 

[rktman]

But could you mill with it?

 

[ray benson]

O&R engines and Orline had some 1.3 cu. in. under 22 cc motors but the saws were around 10 pounds. Lots of saws are lighter.

 

[Scooterbum]

I've found smaller displacement,but they are all heavier.This one is 26cc at 7.2 lbs.
I just figured someone would have made a real mini at sometime or another.

 

[cuttinscott]

I do believe today's smallest lightest gas powered chain saw is our REDMAX G2500TS 25.4cc 6.4lbs.

http://www.redmax.com/productcart/pc/viewPrd.asp?idcategory=2&idproduct=3

Scott

 

[MAG58]

Dolmar PS-221 TH is the smallest i now. 22,2 cc 1,02 BHP

http://www.dolmar.com/site/managed/html/produkt/4475/PS-221_TH

 

[cuttinscott]

But that Dolmar is not available in the USA

Scott

 

[MAG58]

But that Dolmar is not available in the USA

But it is still the smallest gas saw i now :greenchainsaw: