Sold Stihl 029, 025 - Good used cylinders

[cgraham1]

$35 each shipped. Will throw in a carb with the 025 cylinder. Thanks!

 

[cgraham1]

029 Super - 46mm


025...

 

[kyle.kipple]

Happen to have a good piston for the 29?


Sent from my iPhone using Tapatalk

 

[cgraham1]

No piston, just the jug. Sorry

 

[fin460]

will the 029 cylinder work in the same place as a 290?

 

[cgraham1]

will the 029 cylinder work in the same place as a 290?

Ummm... I'll see what I can figure out. I assume it is, but I'm not sure.

 

[cgraham1]

will the 029 cylinder work in the same place as a 290?

I did a little research and it seems the 029 is 45mm, the 029 Super/MS290 is 46mm. This is stamped "46" and "029"

A few pics for the quality control crowd. First is the 029 Super intake. Notice the polished intake flange. If I ever build a 46mm 1127 saw to keep, it will have an 029 Super cylinder on it. Comparing the 029 Super cylinder to the 290 cylinder is like comparing a Timex to a Rolex.

290 intake. Blah.

Exhaust flanges. The machining on the Super is sharp enough to cut yourself on. Not sure if the 290 is machined at all. Notice how nice the casting marks are on the older cylinder......

Two more, and I'm done. Here are the cooling fins on the head. Super is here. Probably harder to make the fins this way, but it sure looks like more fin area to me.

290 fins

too bad the pics are gone.

 

[k_kindig11]

029 cylinder/piston is 45mm
029 super is 46mm
290 is 46mm

As long as you have the matching piston with cylinder (meaning size) they will all interchange... Including with 039, 310, 390. Jus be aware of the decomp button found on the 390s only.

The cylinder he has is 46mm and from either a 029 super or 290... Doesnt really matter because it Will work on either saw without changing piston size.


Sent from my iPhone using Tapatalk