I'm in a selling mood and this one is first on the block. The saw came from the west coast ported. It's missing the chain brake stuff and the carb doesn't have a butterfly for the choke. It will start with a cap full of fuel in it in 3-4 pulls. It has a muffler mod straight out the side with 2 short pipes. Works great milling and keeps the exhaust at the ground instead of bouncing off the log back at you. I have the max flow set up for it and the stock cover. Asking $800 with the 21" or 33" bar. I have a 36" Oregon 3 rivet tip and a 36" tsumura light and tough that can go with it. For $250 more I'll throw in all the bars and chains. I also have a 30" or 56" mill that can be sold with it for some one to get set up into milling. I want to keep one mill but one can go. It's got a new Mako piston and caber rings in it this past week. The old piston is in good shape but the machine marks on the skirt were gone. I'll get more pictures of all the bars and stuff shortly.
