sld961
Addicted to ArboristSite
Complete saw except missing the muffler. This saw ran before it was taken apart(with a muffler on). I took saw apart to clean carbon off of piston and put new rings while I was in there. While it was apart I discovered that the crankshaft is worn beneath the clutch bearing. I lost interest in this saw and just want it gone.
Good for parts, or a long block swap, or put rings on it and run it (will probably wear out clutch drum bearing faster than normal).
The saw sat apart for a few months, so there is some minor surface rust on some of the parts. Easily cleaned up with some emery cloth.
Let me know if you want any specific pictures or any more info.
$130 plus shipping obo.
Good for parts, or a long block swap, or put rings on it and run it (will probably wear out clutch drum bearing faster than normal).
The saw sat apart for a few months, so there is some minor surface rust on some of the parts. Easily cleaned up with some emery cloth.
Let me know if you want any specific pictures or any more info.
$130 plus shipping obo.
