2000ssm6
Stihl User
I need to thin out a few saws and these are extra backups.
440; All oem that is fairly clean, PHO. I've ran 3 tanks through it after replacing the fuel line/filter(oem Stihl green). Stock with a 288 deflector/screen for a muff mod, tabs cut off limiters. The saw runs and oils great. While I could not get any good piston or cylinder pics, they look fine. There is a small crack in the recoil housing but doesn't have any effect on function. $625 shipped to the lower 48.
200; All oem 200 that is pretty clean, PHO. Stock with a muff mod(screen removed). The saw runs and oils great, setup for 3/8 low pro. While I could not get any piston/cylinder pics, looking from the spark plug hole, all looks well. Taking the mufflers off these isn't fun but could try to get some p&c pics for anyone serious. These are some bad arse little limbing saws, great for young or older folks. $500 shipped to the lower 48.
Payment; can do f&f pp, check or usps m/0. For any well known members, if you feel the saw is not as described, full return. Text would be faster but should be able to answer PMs the same day. 9 one zero, six 1 zero, 3 zero 6 nine.
Saws will be tuned rich before shipping, be sure you know how to tune or have a dealer that will help.
The only trade I'd be interested in would be a clean 461, could add $$ if needed on my end.
440; All oem that is fairly clean, PHO. I've ran 3 tanks through it after replacing the fuel line/filter(oem Stihl green). Stock with a 288 deflector/screen for a muff mod, tabs cut off limiters. The saw runs and oils great. While I could not get any good piston or cylinder pics, they look fine. There is a small crack in the recoil housing but doesn't have any effect on function. $625 shipped to the lower 48.
200; All oem 200 that is pretty clean, PHO. Stock with a muff mod(screen removed). The saw runs and oils great, setup for 3/8 low pro. While I could not get any piston/cylinder pics, looking from the spark plug hole, all looks well. Taking the mufflers off these isn't fun but could try to get some p&c pics for anyone serious. These are some bad arse little limbing saws, great for young or older folks. $500 shipped to the lower 48.
Payment; can do f&f pp, check or usps m/0. For any well known members, if you feel the saw is not as described, full return. Text would be faster but should be able to answer PMs the same day. 9 one zero, six 1 zero, 3 zero 6 nine.
Saws will be tuned rich before shipping, be sure you know how to tune or have a dealer that will help.
The only trade I'd be interested in would be a clean 461, could add $$ if needed on my end.
